Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet It does not include LED indicators or key fobs and is hidden within the wiring of the vehicle.
It also permits the user to turn off the system temporarily by using Transport Mode in the event of renting their vehicle. This guide will guide you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is connected directly to the ECU of your car and protected by a pin code that you choose. It is undetectable by thieves using diagnostic scanners and other modern methods. It is not able to be disabled by cutting circuits.
The system is easy to use, but professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking or alarm system to complete the security package for your vehicle.
To avoid an accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. When the battery is disconnected, the installer can start working safely. Basic hand tools can be used to make precise connections. A multimeter is useful to test electrical values. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. The Ghost Immobiliser user's manual will provide specific guidelines tailored to your model.
During the installation, it is crucial to select an area for grounding that is free of any paint or debris. The installer must also make sure the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. Based on the model, these wires might require soldering or plugged into. Using a top-quality connector is recommended to ensure a long-lasting and secure connection.
Once the installation is complete After the installation is complete, the customer can turn on after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To do this, the customer must hit the button for service on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's an excellent choice for anyone who frequently rents out their cars on platforms like Turo. An immobiliser can cut down on insurance rates, as it decreases the likelihood of theft.
Getting Started
If you are looking for a solution that will protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device prevents your vehicle from running even if someone steals or copies your key. This is due to its high-tech technology that is designed to prevent the engine from starting without the correct PIN code is entered.
The device connects to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence only you know which makes it impossible for someone else to start your vehicle. This is the best security system to protect your car's pride and joy and will ensure its value in the event that you decide to sell it in the future.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical problems and malfunctions of the system. First, you need to locate and determine a constant 12V power source and a good grounding point on the chassis of your vehicle. After that, you are able to begin to connect the wires for the immobiliser. Use high-quality connectors, and soldering techniques to ensure a solid connection. Also, make sure to cover the connections with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
After the wires have been connected, you can reconnect the battery and turn on the engine to test the function of the immobiliser. After you've confirmed that everything is functioning properly then you can put the immobiliser in a secure place inside the vehicle. Make sure to cover it in a secure manner so that a thief cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it complies with the highest standards of security and is a fantastic protection against car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and it isn't able to be disabled unless you know the code. The device is easy to use and can be set up to an option for a service valet so that your vehicle will not be activated if you bring it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with the factory settings for your vehicle.
The system is also unnoticeable by thieves using scanners for diagnostics. This is due to the fact that it does not transmit and receive radio frequency signals, and it uses CAN data to communicate with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one button) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash two times to confirm that you've entered the correct code. You are now able to begin driving your car in a safe manner.
Once installed, Ghost Immobiliser protects your car against key cloning or hacking while preserving its value. If you ever have to hand over your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) in addition to an earthing point to complete the installation of the Ghost immobiliser. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested to secure the wires. what is ghost immobiliser will reduce the chance of theft by thieves. Be sure to double-check the location of these points to avoid making mistakes and mark them with an adhesive or label. It's recommended to check every connection for signs of wear and tear. Loose connections can lead to system malfunctions, so be sure that they're firmly in place and properly insulated. Finally, don't forget to test the Ghost Immobiliser after installation is complete. This will ensure that the unit is operating correctly, and that all connections are secure and insulated. If there are any issues, be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car's ECU to block unauthorized engine start. Its cutting-edge technology protects your vehicle from key cloning and hacking along with other methods used by thieves to steal vehicles. The Ghost also works in tandem with existing alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unparalleled features and discreet design make it a popular choice for car enthusiasts and security-conscious drivers alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow every step of the installation process. A good starting point is to consult the wiring diagram for your vehicle that will serve as a guideline to locate and connecting the required wires. You'll then need to identify the power and grounding sources. Once you have located them, you will need to mark the points to make them easy to locate when installing. In addition, it is important to use top-quality tools and materials. what is ghost immobiliser are essential to help you make precise connections. A multimeter will verify electrical values, and ensure safety. Insulation tape and cable ties will help keep all connections tidy and neat. A Ghost-specific user's guide is also available.
Before beginning the installation it is important to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser is working in the way it was intended, preventing unauthorized vehicle starts. It is recommended that you perform this procedure regularly as part of your regular inspections of the vehicle to ensure the system is working properly.
Once the installation is complete, you can drive your vehicle with confidence. The Ghost will guard your vehicle from would-be car thieves. It will ensure that no one can take your car away even if they don't have the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to detect any attempt at tampering or theft that could lead to the location of your vehicle in the event of it being stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with all major brands. If you are interested in protecting your car using this advanced device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines for installing our products. This assures insurance companies, customers and law enforcement agencies that installations are done safely and correctly.